Download Print this page

Smeg CW350B User Manual page 8

Professional glasswashers

Advertisement

MAIN FUNCTIONS WITH MACHINE POWERED
ITEM
Description
Machine powered
L1
led indicator
Tank emptying led
L2
indicator
On/Off button
Tank emptying
button
Programs button
OPTIONS button
Tank led indicator
Salt led indicator
Boiler led indicator
KEYBOARD FUCNTIONALITY CW400RSD – CW400R
Function
This led indicator turns on (green) when electrical current is present
This led indicator (green) indicates that the machine is emptying the
Tank – the led flashes when the operation is in progress.
Pressing this button with led indicator 1 on activates the keyboard
and renders the machine operational.
The last program used (wash cycles) will be shown on the 3
displays when turned on.
To empty the Tank first remove the Tank's overflow, then press the
button for 3 seconds. This inhibits water from being loaded and,
after a Pressostat Tank-empty signal verifies that the Tank has
been emptied, will only allow a limited amount of boiler water to
circulate in order to facilitate the cleaning of the Tank.
At the end of the function the machine goes into a stand-by phase
which is indicated by the appearance of three dashes "---" upon the
displays. To render the machine operational again it is therefore
necessary to insert the Tank's overflow and to press the
If the machine is equipped with the drain pump option, the drain
pump will also be activated.
By repeatedly pressing this button the various wash cycles can be
viewed (brief 60", medium 120", long 180", continuous)
The use of this button does the following, in sequence:
Enables the "crystal cycle" only with the medium cycle 120"
("C" on the display"); Sets the T of the boiler from 85°C to
70°C
Enables regeneration (rig on the display) if decal is
installed. (if a program has not been set, it will not be
performed)
Indicates, when on, that the temperature shown during washing is
that of the Tank.
Indicates insufficient salt quantity (if prescribed in the function)
The led indicator turns on for the closing of a reed contact.
Boiler resistance in function symbol
 
 
button.

Advertisement

loading