Conformity - Nice M3BAR Instructions And Warnings For Installation And Use

12

CONFORMITY

13 CONFORMITY
Note - The contents of this declaration correspond to declarations in the official document deposited at the registered offices of Nice S.p.a. and in particular to the last revision available before
printing this manual. The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested from Nice S.p.a. (TV) I.
Number: 405/M-LBAR
Manufacturer's Name:
Address:
Authorized Person to constitute
technical documentation:
Type of product:
Model/Type:
Accessories:
The undersigned Roberto Griffa, in the role of Chief Executive Officer, declares under his sole responsibility that the product described above complies with the provisions
laid down in the following directives:
• Directive 2014/53/EU (RED), according to the following harmonized standards: Health protection standards (art. 3(1)(a)) EN 62479:2010, Electrical safety (art. 3(1)(a))
EN 60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013, Electromagnetic compatibility (art. 3(1)(b)) EN 301 489-1 V2.2.0:2017, EN 301 489-3 V2.1.1:2017,
Radio spectrum (art. 3(2)) EN 300 220-2 V3.1.1:2017.
The product also complies with the following directives according to the requirements envisaged for "partly completed machinery" (Annex II, part 1, section B):
• Directive 2006/42/EC of the EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 related to machinery and amending the Directive 95/16/EC (recast).
It is hereby stated that the relevant technical documentation has been compiled in accordance with annex VII B of Directive 2006/42/EC and that the following essential
requirements have been fulfilled: 1.1.1 - 1.1.2 - 1.1.3 - 1.2.1 - 1.2.6 - 1.5.1 - 1.5.2 - 1.5.5 - 1.5.6 - 1.5.7- 1.5.8 - 1.5.10 - 1.5.11
The manufacturer undertakes to transmit to the national authorities, in response to a reasoned request, the relevant information on the " partly completed machinery ", while
maintaining full rights to the related intellectual property.
Should the " partly completed machinery" be put into service in a European country with an official language other than that used in this declaration, the importer is obliged
to arrange for the relative translation to accompany this declaration.
The "partly completed machinery" must not be used until the final machine in which it is incorporated is in turn declared as compliant, if applicable, with the provisions of
directive 2006/42/EC.
The product also complies with the following standards:
EN 60335-1:2012+A11:2014, EN 62233:2008, EN 60335-2-103:2015, EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
Oderzo, 04/04/2018
44 – ENGLISH
EU Declaration of Conformity
and declaration of incorporation of "partly completed machinery"
Rev: 16 Language: EN
Nice s.p.a.
Via Callalta 1, 31046 Oderzo (TV) Italy
Nice s.p.a.
Electromechanical barrier gate
M3BAR, M5BAR, M7BAR, L9BAR, M3BARI, M5BARI, M7BARI, L9BARI
Refer to the catalog
Ing. Roberto Griffa
(Chief Executive Officer)