Table of Contents
Advertisement
To be used only in the case of installations in conformity with chapter 1 and more specifically paragraph 1.3.1
To be detached, compile box N°1 and deliver to automation owner together with the operation manual and maintenance schedule
Declaration in accordance with Directives: 2004/108/CE (EMC); 1999/5/CE (R&TTE), 2006/42/CE (MD) Appendix II, part A;
89/106/CEE (CPD) procedure according to appendix III, ii, possibility 2 (System 3)
Box N° 1
The installation of the product: M-LBAR Road Barrier
Complete with pole: XBA4 and following accessories: ..........................................................................................................................................................
Was performed by:
Company: ................................................................................................. Address: ........................................................................................................
Name and Surname of responsible installer: ........................................................................................................................................................................
The installer hereby declares to have strictly observed all provisions of the instruction manual enclosed with the product:
Data ....................................................... Signature: ........................................................................
Place of product installation, at: .................................................................. Address: ........................................................................................................
Caution! – This declaration of conformity is not to be considered valid if all fields in this box are not duly compiled.
Note - The content of this declaration corresponds to the declaration made in the official document filed in the offices of Nice S.p.a., and particularly the lat-
est version thereof available prior to the printing of this manual. The text contained here has been adapted to meet editorial requirements. A copy of the orig-
inal declaration may be requested from Nice S.p.a. (TV) I.
Declaration number: 404/M-LBAR
Name of manufacturer:
Address:
Person authorized to
provide technical
documentation:
Product type:
Model / Type :
Accessories:
The undersigned Luigi Paro, as Managing Director, hereby declares under his own responsibility that the product identified above complies with the provisions
of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15 2004 concerning alignment of Member States' legislation
regarding electromagnetic compatibility and abrogating directive 89/336/EEC, according to the following harmonized standards: EN 61000-6-2:2005, EN
61000-6-3:2007
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending directive 95/16/EC (consoli-
dated text)
Should the machinery be put into service in a European country with an official language different from the one of this declaration, the importer must attach
the translation of this document to the declaration.
• Directive 89/106/EEC of the European Council of 21 December 1988 regarding the approximation of legislation, regulations and administration of Member
States concerning construction products, according to the following harmonised standards: EN 13241-1:2003
Essential requirements for CE marking
Characteristics
Release of hazardous substances
Resistance to wind load
Safe opening for vertically moving doors
Mechanical strength and stability
Manoeuvring forces for power-operated doors/gates
(*) CERT of Treviso Tecnologia in Lancenigo di Villorba (Tv)
Also conforms to the essential requirements specified in article 3 of the following community directive, for the products' intended use:
• Directive 1999/5/CE OF THE EUROPEAN PARLIAMENT AND COUNCIL dated March 9 1999 regarding radios and communications terminals and recipro-
cal recognition of their conformity in accordance with the following harmonized standards:
• Protection of health (art. 3(1)(a)): EN 50371:2002
• Electrical safety (art. 3(1)(a)): EN 60950-1:2006+A11:2009
• Electromagnetic compatibility (art. 3(1)(b)): EN 301 489-1 V1.8.1:2008, EN 301 489-3 V1.4.1:2002
• Radio spectrum (art. 3(2)): EN 300 330-2 V1.5.1:2010
In accordance with directive 1999/5/CE (annex V), the product is classified as class 1 and marked:
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008+A14:2010
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003, EN 60335-2-103:2003+A11:2009
Oderzo, June 21 2011
APPENDIX I
CE declaration of conformity
matricola N° serial N° (see label):.....................................................................................................
Revision: 0
NICE S.p.A.
Via Pezza Alta 13, Rustignè Industrial Zone, 31046 Oderzo (TV) Italy
Mr. Oscar Marchetto
Electromechanical barrier lift
M3BAR, M5BAR, M7BAR, LBAR
XBA14, XBA15, XBA4, XBA6, XBA18, XBA9, XBA7, XBA8
Certifying Authority
CERT(CPD n°1600)
CERT(CPD n°1600)
CERT(CPD n°1600)
–
CERT(CPD n°1600)
Language: EN
Document
374/11, 375/11, 376/11, 377/11
374/11, 375/11, 376/11, 377/11
374/11, 375/11, 376/11, 377/11
2009_002 SP S14
374/11, 375/11, 376/11, 377/11
0682
Luigi Paro
(Managing Director)
English – 21
Advertisement
Table of Contents
