Table of Contents
Advertisement
Control and maintenance
13
19
22
24
12
9
11
13.Check whether or not the service unit (9) goes
with the control unit (1) (model designation and
colour of the arresting hook).
14.Check the O-rings at the new service unit (12,
13).
15.Mount the design shell (11).
16.Mount the service unit along with the design
shell at the condensate receiver tank (19) and
tighten both erection bolts (22) (2,5 Nm).
17.Re-install the BEKOMAT at the inlet tubing and
outlet, in reverse order to disassembly.
BEKOMAT® 33U / 33U CO
Hide quick links:
Advertisement
Table of Contents
