WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align the front panel light-board cable to the slot on the chassis.
2
Replace the screw (M3x5) that secures the front panel light-board to the chassis.
3
Connect the front panel light-board cable to the logo board.
4
Route the cables through the routing guides on the chassis and connect the front panel light-board cable to the system board.
Replacing the front-panel light board
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the front-panel light board
50
85