Permobil M1 User Manual page 235

M1
Maintenance and repairs
To disinfect, hand wash in warm (104°F) water using 1 part
household liquid bleach per 9 parts water. Rinse thoroughly with
clean water. Alternatively, machine wash in hot (140°F) water.
Tumble dry on low.
Foam pad, foam insert and lumbar support pad
Before cleaning, remove the foam components from the cover.
To clean, wipe lightly with a damp cloth. Do not use soap. Do not
immerse in water. Wipe off with a clean cloth. Air dry completely
before replacing in cover.
Disinfectants are not effective on porous surfaces such as foam.
Replace soiled or contaminated foam components with approved
ROHO® foam components only. Replacement foam components
may be purchased separately. Soiled or contaminated foam
components must not be used by different individuals.
Air insert
Before cleaning and disinfecting, remove the air insert from the
cover and foam pad. Make sure the inflation valve is closed. Do not
allow water or cleaning solution to enter the air insert.
To clean, place in a large sink or basin with warm water. Hand wash
using mild liquid laundry detergent or a multipurpose detergent
(follow product label instructions). Gently scrub all cushions surfaces
235