M1 Joystick Panel Vr2-A Two Seat Functions; General; Charger Socket - Permobil M1 User Manual

M1

General

The control panel consists of a joystick and function buttons. The
charger socket is located on the front of the panel.

Charger socket

This socket may only be used for charging or locking the
wheelchair. Do not connect any type of programming cable to this
socket. Do not use the socket as a power supply for any other
electrical device. Connecting other electrical devices may damage
the control system or affect the wheelchair's EMC (electromagnetic
compatibility) performance.
NOTICE
Use only the supplied battery charger
The wheelchair's warranty will be voided if any device other than the
battery charger supplied with the wheelchair or the lock key is connected
via the control panel charger socket.
Joystick panel VR2–A two seat functions
Figure 82. Charger socket.
123