Permobil M1 User Manual page 176

M1
If the Read Code operation fails, a red cross will be displayed on the
screen. Please retry the Learn Code operation.
After the code has been learned, scroll down to highlight Exit.
Deflect the joystick to the left to return to the appliance menu, IR
Setup.
The first time an IR code is learned, it is necessary to cycle the
power by turning the power off at the control panel and on again.
If other IR codes have already been learned, it is not necessary to
cycle the power.
176
Permobil Joystick Module for R-net
Figure 148. Learning operation unsuccessful.
Figure 149. Scroll down to Exit.