Adaptation To Different Types Of Gas - Smeg PGA95SC3 Instruction Manual

Instructions for the installer

4. ADAPTATION TO DIFFERENT TYPES OF GAS

Before performing any cleaning or maintenance work, detach the
appliance from the electrical socket.
The hob of the cooker is adjusted for use with either natural gas at a
pressure of 1.0 kPa. If used with other types of gas, you have to
replace the nozzles, then adjust the minimum flame on the gas taps.
For nozzle replacement and burner adjustment operate as described in
the following paragraph.
4.1
This operation requires no primary air regulation.
1.
2.
3.
4.
14
Replacement of nozzles on the hob
Extract the grids and remove all the caps and flame-spreader
crowns;
unscrew the burner nozzles with a 7 mm socket wrench;
replace the nozzles according to the type of gas to be used and the
description in paragraph "4.2 Burner and nozzle characteristics
table".
Replace the burners in the correct position.