Advertisement
2)
4)
Apply a layer of "waterproof primer" to the milled surface.
Important: Other types of installation will only be possible under the
manufacturer's supervision.
The hob also has two additional brackets "A" (see figure 4) which allow even more
secure fixing of the hob to the unit. The brackets "A" must be fixed to different holes in
the hob casing depending on whether the hob is going to be built into a unit from 20
mm to 30 mm thick (Detail "C") or from 30 mm to 50 mm thick (Detail "B") (See figure
5).
4)
24
Instructions for the installer
3)
Mill to this depth for laminated worktops of less
than 3mm thickness.
5)
Hide quick links:
Advertisement
