Table of Contents
Advertisement
Installation
2.4 Conduit connections
The DirectLine provides a male ½" NPT thread to accommodate a customer conduit
connection. Use ½" conduit coupling (min. 38.1mm (1.5") long) on DL conduit
connection to clear cordset connector. Conduit can not be used with field wiring
connector due to size restriction.
Do not exceed 200in-lb. torque when attaching fixed piping.
Use wrench flats provided under the ½" NPT threads to support the DirectLine
during installation.
10
Hose Clamp Slot
for Pipe Mounting
(Hose Clamp
included in kit)
Through Hole for
DIN Rail Mounting
Metal clip for
"U" DIN rail mounting
Mounting Kit
View from End
Panel
Terminal Connectors
Front View
"U" Style DIN Rail
Figure 2-5 Remote Mounting Hardware
DirectLine® DL422 Sensor Module User Manual
Gray clip for
"G" DIN rail mounting
View from End
Panel
Panel
Barriers, Repeater, Isolators
Front View
"G" Style DIN Rail
1/03
Advertisement
Table of Contents
