SMC Networks SMC6724L2 Installation Manual page 44

M N
AKING ETWORK
Figure 4-3. Making SC Port Connections
4. As a connection is made, check the Activity LED on the
switch's front panel for the corresponding module to be sure
that the connection is valid.
Note: If you use the optional SC-ST Converter, be sure to connect
the converter's Tx (Rx) port to the Rx (Tx) port on the other
device.
The 1000BASE-SX fiber optic ports operate at 1 Gbps full duplex,
with auto-negotiation of flow control. The maximum length for
fiber optic cable operating at Gigabit speed will depend on the
fiber type as listed under "1000 Mbps Gigabit Ethernet Collision
Domain" on page 2-5.
4-6
C
ONNECTIONS