Desktop Or Shelf Mounting; Figure 3-4 Attaching The Adhesive Feet - SMC Networks SMC TigerSwitch 10/100 SMC6128L2 Installation Manual

I
NSTALLING THE
3. If installing a single switch only, turn to "Connecting to a Power
Source" at the end of this chapter.
4. If installing multiple switches, mount them in the rack, one below the
other, in any order.

Desktop or Shelf Mounting

1. Attach the four adhesive feet to the bottom of the first switch.
2. Set the device on a flat surface near an AC power source, making sure
there are at least two inches of space on all sides for proper air flow.
3. If installing a single switch only, go to "Connecting to a Power Source"
at the end of this chapter.
4. If installing multiple switches, attach four adhesive feet to each one.
Place each device squarely on top of the one below, in any order.
3-6
S
WITCH

Figure 3-4 Attaching the Adhesive Feet