Technical Data; 3:1 Or 5:1 Oil Models - Graco LD Series Instructions Manual

Technical Data

Technical Data

3:1 or 5:1 Oil Models

Maximum fluid working pressure
Fluid pressure ratio
Suction lift (feet of oil)
Air operation range
Recommended air pressure for optimum
pump life
Air consumption (at 100 psi)
Cycles per gallon/(liter)
Maximum recommended pump speed
Recommended speed for optimum pump
life
Wetted parts
Sound pressure level†*
Sound power level‡*
Performance curve
Approximate weight
Dimensions
† Calculated at a distance of 1 meter from measurements taken per ISO 9614-2 @ 100 psi air pressure (6.89 bar,
0.68 MPa) and 20 cycles per minutes.
‡ Measured per ISO 9614-2 at 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minute.
* Muffler 112933 can be ordered separately for reduced sound levels.
26
750 psi (51.7 bar, 5.17 MPa)
3:1 or 5:1
10
20 to 150 psi (1.37 to 10.3 bar; 0.137 to 1.03 MPa)
<125 psi (8.6 bar, 0.86 MPa)
See Performance Curves, page 28
3:1 - 29 cycles per gallon (7 cycles per liter); 5:1 - 37 cycles per gallon)
(10 cycles per liter)
3:1 - 120 cycles per minute; 5:1 - 180 cycles per minutes
75 cycles per minute and lower
3:1 - 2.6 gallons per minute (9.8 liters per minute); 5:1 - 2 gallons per
minute (7.6 liters per minute)
zinc plated carbon, steel, aluminum, nitrile, polyurethane, nickel plated
aluminum
72.9 dB(a)
82.0 dB(a)
See charts page 28
3:1 - 7 pounds (3.2 kg); 5:1 - 7.7 pounds (3.5 kg)
See page 30
3A1334P