Creating Log Charts; Editing Data; Table 7-5 Log Chart Information - SMC Networks EliteView 6.20 Management Manual

Menu
* Window - indicates the windows for which this menu is active.

Creating Log Charts

Open the Chart Manager utility either from the Utility menu in the main EliteView program or from the Program
Manager. Click on Open under the File menu and select a dBase file (*.dbf) that was generated by the Log Manager.
Names for log files are based on the time the log file was generated, using a format of hhmmss (hh:hour,
mm:minutes, ss:seconds). Information displayed in the log chart includes the following items:
Parameter
Date
Time
Difference
Interval
Rate

Editing Data

The significant parameter displayed under the data summary chart and graphic display is the rate of change for the
recorded value. If there are inconsistencies or extreme values for the rate that adversely affect your data summary
or log charts, you can easily adjust these values. Using the edit cursor, double-click on any cell under the Rate
column and change the recorded value. Remember that you can only change values for rate.
Table 7-4 Chart Manager Menu Definitions
Label Description
Help Help Facility – Access detailed help information
about the Chart Manager.

Table 7-5 Log Chart Information

Example
20050322
165506
1086
5
217
Description
Date this event was recorded. Format for date is
yyyymmdd (yyyy:year, mm:month,dd:day).
Time this event was recorded. Format for time is
hhmmss (hh:hour, mm:minute, ss:second).
Difference in value for consecutive events.
Time between consecutive events.
Rate of change in recorded value per second
C M U
HART ANAGER TILITY
7-15