SMC Networks EliteView 6.20 Management Manual page 76

SNMP MIB M
ANAGEMENT
Field
InDiscards
InError
OutOctets
OutUcastPkts
OutNUcastPkts
OutDiscards
OutError
Viewing Statistics
The STAT button is used to display a real-time graph of the
corresponding counter read during each polling interval.
Click Stat to display the corresponding graph.
Click on Config under the Option menu to change parameters for the
graph. The Config Statistics dialog box appears. You can change the
graph's scale, ruler, style [i.e., filled curve, curve (fill)], and color, or reset
the graph. Click OK to return to the graph, or Cancel to abort any
changes.
Click on Exit under the Option menu to return to the invoking window.
6-10
Table 6-5 Field Description for Interface Statistics Window
Description
Number of inbound packets that were discarded even though no errors were detected. One
reason for discarding such packets is lack of buffer space.
The number of inbound packets containing errors that prevented them from being delivered to
a higher-layer protocol.
Total number of bytes transmitted from the interface, including framing characters.
Total number of packets requested by higher-level protocols for retransmission to a unicast
address, including those either discarded or not sent.
Total number of packets requested by higher-level protocols for retransmission to a broadcast
or multicast address, including those either discarded or not sent.
The number of outbound packets containing errors that prevented them from being delivered
to a higher-layer protocol. One reason for discarding such packets is to free up buffer space.
Number of outbound packets that could not be transmitted due to errors.