Table of Contents
Advertisement
C
E
V
USTOMIZING
LITE
Parameter Definitions for the [startup] Section
Parameter
Seq=
EV_Flag
Menu_Item
Executable
Optional Parameters
Example: Sample entry for
[startup]
total=2
1=1,EVENT.EXE
2=1,TRAPMAN.EXE
From the
[startup]
•
There are two applications that will be loaded with the main EliteView program.
•
These are the Event Manager and the Trap Manager.
The [discover] Section
This section determines the settings for protocol selection and polling parameters under the Discovery module.
These settings are determined by the choices you make during Configuration and within the Discovery Setup
menu (see "Using Discovery" on page 4-2).
B-10
IEW
Table B-8 Parameter Definitions for the [startup] Section
The sequence number from 1 to n, where n is a positive number equal to the total number of
startup processes you wish to invoke before running the EliteView platform program.
Distinguishes between EliteView and non-EliteView applications. Acceptable values include:
0 Designates the entry as a "Non-EliteView Windows application." This means it cannot work
closely with EliteView, but may be initiated within some EliteView commands as an
independent process.
1 Designates an "EliteView Application;" i.e., it follows the set of rules specified by SMC to allow
interaction with other EliteView modules.
This is the text that appears in the menu. An ampersand "&" before one of the letters in the text
designates an Alt-key short-cut command sequence, which you can press to invoke the
corresponding command. This is normally shown on screen with an underline.
The name of the Windows application to be invoked when the corresponding item is selected.
This application program is set as the default application, which means that it is invoked only if
no other definition for an individual device exists.
Command line parameters of the program. Optional entry.
[startup]
section, you can view the following data:
Given Information
section
Advertisement
Table of Contents
