Table of Contents
Advertisement
You can filter raw data for any frame type. Or you can filter detailed information from the header fields if you
indicate frame type. When filtering Ethernet II, Ethernet 802.2 or Ethernet SNAP, you can specify the network
protocol (IP, IPX, Unknown), as well as the transport protocol (IP: All, TCP, UDP, Unknown; or IPX: All, RIP,
SAP, Unknown). Also regardless of the frame type, you can choose to filter all packets or just certain error packets
(such as fragments or jabber). Detailed configuration options for filters are shown in the following table.
Field
Description
Index
An index that uniquely identifies an entry in the filter table.
Channel
The owner who created the corresponding channel entry, and the channel index.
Frame Type
The frame type to filter. Values: All, Ethernet II, Ethernet 802.2, Ethernet SNAP, Ethernet 802.3 Raw,
Unknown
Protocol
The network protocol to filter. This entry is only available if Ethernet II, Ethernet 802.2, or Ethernet
SNAP is the selected frame type.Values: IP, IPX, Unknown
Upper-Layer
The transport protocol to filter. The options available depend on the selected network protocol.IP:
Protocol
All, TCP, UDP, UnknownIPX: All, RIP, SAP, Unknown
Table 9-19 Filter Configuration Options
RMON U
TILITIES
9-25
Advertisement
Table of Contents
