Advertisement
G3830, G3860, G3865 Fryers
USERS INSTRUCTIONS
SECTION 1 - GENERAL DESCRIPTION
SECTION 2 - LIGHTING and OPERATIONS
SECTION 3 - COOKING HINTS
SECTION 4 - CLEANING and MAINTENANCE
This appliance has been CE-marked on the basis of compliance with the Gas Appliance Directive
for the Countries, Gas Types and Pressures as stated on the Data Plate.
The appliance MUST BE installed by a competent person in compliance with the INSTALLATION AND SERVICING
INSTRUCTIONS and National Regulations in force at the time. Particular attention MUST be paid to the following:
Gas Safety (Installation & Use) Regulations
Health and Safety at Work Act
Furthermore, if a need arises to convert the appliance for use with another gas, a competent person must be
consulted. Those parts which have been protected by the manufacturer MUST NOT be adjusted by the User.
Users should be conversant with the appropriate provisions of the Fire Precautions Act and the
requirements of the Gas Safety Regulations. in particular the need for regular servicing by a competent
person to ensure the continued safe and efficient performance of the appliance.
WARNING - TO PREVENT SHOCKS, ALL APPLIANCES WHETHER GAS OR ELECTRIC, MUST BE
EARTHED.
Upon receipt of the User's Instruction manual, the installer should instruct the responsible person(s) of the
correct operation and maintenance of the appliance. This equipment is ONLY FOR PROFESSIONAL USE,
and shall be operated by QUALIFIED persons. It is the responsibility of the Supervisor or equivalent to ensure
that users wear SUITABLE PROTECTIVE CLOTHING and to draw attention to the fact that, some parts will, by
necessity, become VERY HOT and will cause burns if touched accidentally.
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of unit life, dispose of appliance and any replacement
parts in a safe manner, via a licenced waste handler.
Units are designed to be dismantled easily and recycling of all
material is encouraged whenever practicable.
Falcon Foodservice Equipment
HEAD OFFICE AND WORKS
Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.
SERVICELINE CONTACT
Phone: 01438 363 000
Fax: 01438 369 900
T100822 Ref. 3
1
Advertisement
Table of Contents
Related Manuals for Falcon G3830
Summary of Contents for Falcon G3830
- Page 1 G3830, G3860, G3865 Fryers USERS INSTRUCTIONS SECTION 1 - GENERAL DESCRIPTION SECTION 2 - LIGHTING and OPERATIONS SECTION 3 - COOKING HINTS SECTION 4 - CLEANING and MAINTENANCE This appliance has been CE-marked on the basis of compliance with the Gas Appliance Directive for the Countries, Gas Types and Pressures as stated on the Data Plate.
- Page 2 Training and Competence To help ensure the safe use of this appliance there is a requirement for you to provide whatever information, instruction, training and supervision as is necessary to ensure, so far as is reasonably practicable, the health and safety of all users.
- Page 3 Prior to first time use, pan should be thoroughly cleaned using hot water and detergent. Rinse and dry upon completion. Make sure drain valve is closed. Fill pan with oil up to level indicated by strip on well rear. Approximate Capacities G3830 – 15 litres G3860 – 24 ltres G3865 – 2 x 15 litres Lighting Instructions...
- Page 4 Attention In the event of the safety cut-out being activated carry out the following: 1. Wait at least half an hour to allow oil to cool. 2. Remove dust cover and press re-set button located inside safety cut-out mounting turret using a blunt implement or a pen. If safety cut-out continues to activate call service engineer SECTION 3 - COOKING HINTS Frying Chips...
- Page 5 SECTION 4 - CLEANING and MAINTENANCE When removing heavy items to aid cleaning or maintenance particular care should be taken. A manual handling risk assessment is the best way to determine the level of risk to anyone using or maintaining this equipment. To help with such an evaluation we have included the weights of individual components that may present significant risk.
- Page 6 SECTION 5 - SPARE PARTS The following parts may require replacing during the life of this appliance. Safety thermostat Spark igniter Spark ignition electrode Operating thermostat Multifunctional control (MFC) Thermocouple c/w interrupter Pilot assembly...
Need help?
Do you have a question about the G3830 and is the answer not in the manual?
Questions and answers