Creating Your Own Programme (Programme Play) - Sony CDP-XE330 Operating Instructions Manual

Playing CDs
Creating Your Own Programme
(Programme Play)
You can arrange the order of the tracks on a disc and
create your own programme. The programme can
contain up to 24 tracks.
• CDP-XE530
PLAY MODE
• CDP-XE330
PLAY MODE
Creating a programme on the player
1
Press PLAY MODE repeatedly until "PROGRAM"
appers in the display before you start playing.
2
Turn ≠ AMS ± until the track number you
want appears in the display.
• CDP-XE530
Playing order
TRACK
• CDP-XE330
PROGRAM
12 GB
CHECK CLEAR ≠ AMS ±
·
CHECK CLEAR ≠ AMS ±
·
Total playing time
Track number being
programmed
STEP MIN SEC
2
PROGRAM
Track number being
Total playing time programmed
MIN SEC 2
3
Push ≠ AMS ± to select the track.
• CDP-XE530
Last programmed track
• CDP-XE330
Last programmed track
PROGRAM
p
After one second
PROGRAM
p
If you've made a mistake
Press CLEAR, then repeat Steps 2 and 3.
4
Repeat Steps 2 and 3 to programme the tracks in
the order you want.
5
Press · to start Programme Play.
To cancel Programme Play
Press PLAY MODE.
When tracks, which aren't numerically consecutive on
the disc, are programmed consecutively (i.e. 1, 3, 5
etc.)
A one-second access time blank is added between the
tracks.
The programme remains until erased (see page 13) or
until you press §OPEN/CLOSE
The programme you have created remains even after the
Programme Play mode ends or you select another play
mode.
Notes
• The total playing time doesn't appear in the display when it
exceeds 100 minutes.
• If you programme a track numbered over 24 (or 68 for the
CDP-XE330), "– – . – –" appears instead of the total playing
time.
• "PROGRAM FULL" (or "FULL" for the CDP-XE330)
appears in the display when you try to add a track to a
programme which already contains 24 tracks.
Total playing time
Playing order
TRACK STEP MIN SEC
PROGRAM
TAPE A
Programmed tracks
Playing order
STEP
A
Programmed tracks
MIN SEC
A
Total playing time
2 5
8
2 5
8
2 5
8