SMC Networks Barricade SMC7404WBRA EU User Manual page 76

C
ONFIGURING THE
Parameter
RIP Defect
When hackers
attempt to enter
your network, we
can alert you by
e-mail
Your E-Mail
Address
SMTP Server
Address
POP3 Server
Address
User Name
Password
Connection Policy
Fragmentation
half-open wait
TCP SYN wait
TCP FIN wait
TCP connection
idle timeout
UDP session idle
timeout
4-48
B
ARRICADE
Defaults
Enabled
10 sec
30 sec
5 sec
3600 seconds
(1 hour)
30 sec
Description
If the router does not reply to an IPX RIP
request packet, it will stay in the input queue and
not be released. Accumulated packets could
cause the input queue to fill, causing severe
problems for all protocols. Enabling this feature
prevents the packets accumulating.
Enter your e-mail address.
Enter your SMTP server address (usually the
part of the e-mail address following the "@"
sign).
Enter your POP3 server address (usually the
part of the e-mail address following the "@"
sign).
Enter your email account user name.
Enter your email account password.
Configures the number of seconds that a packet
state structure remains active. When the timeout
value expires, the router drops the unassembled
packet, freeing that structure for use by another
packet.
Defines how long the software will wait for a
TCP session to reach an established state before
dropping the session.
Specifies how long a TCP session will be
managed after the firewall detects a
FIN-exchange.
The length of time for which a TCP session will
be managed if there is no activity.
The length of time for which a UDP session will
be managed if there is no activity.