Air Filter Inspection - Husqvarna W 40P Operator's Manual

MAINTENANCE

AIR FILTER INSPECTION

Unscrew the wing nut and remove the air cleaner cover. Check the air
filter to be sure it is clean and in good condition.
If the air filter is dirty, clean it as described on page 33. Replace the air
filter if it is damaged.
Reinstall the air filter and air cleaner cover. Be sure all the parts shown
below are in place. Tighten the wing nut securely.
NOTICE
Operating the engine without an air filter, or with a damaged air filter,
will allow dirt to enter the engine, causing rapid engine wear.
NUT
FILTER STAND
AIR FILTER
WING NUT
31