Setting Engine Speed - Husqvarna W 40P Operator's Manual

OPERATION
8. lf the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine warms
up.

SETTING ENGINE SPEED

After starting the engine, move the throttle lever to the FAST position for
self-priming, and check pump output.
Pump output is controlled by adjusting engine speed. Moving the
throttle lever in the FAST direction will increase pump output, and
moving the throttle lever in the SLOW direction will decrease pump
output.
20
THROTTLE LEVER
OPEN
FAST