Core Identification And Continuity In Short Circuit Mode - Made JUPITER PLUS User Manual

3.2.1.3.Core identification and continuity in short circuit
mode
Mode usable in all cases
 Connect the loop for core identification in short circuit to the
receiver, press the « measurement » button, the "Short
circuit identification and S1 continuity" LED switches on.
 Put the loop around the core to identify, and close it.
 Press the « measurement » button, the « end of
measurement » turns off.
 Wait for the result (3 seconds), the « end of measurement »
turns on.
 If the core is identified, the L1, L2 or L3 and the YES LED
illuminates.
 Repeat the operation to identify the other cores.
The receiver designates the core within the loop.
IMPLEMENTATION
23 / 30