3.2.JUPITER+ RECEIVER
The JUPITER+ Receiver assembly consists of:
The Receiver to which are connected the sensors
Inductive sensor for identification
Probes for core identification and continuity with open
circuit.
Flexible
identification
On option: a double flexible loop for core identification on a
4 conductor LV cable.
The Receiver and its sensors are supplied in a carrying case, which
itself fits into the lid of the Transmitter case.
The JUPITER+ Receiver is used to identify a cable of which the
extremities are in short-circuit and earthed, to identify the cores in an
open or closed circuit cable.
This is done in normal operation on unpowered HV & LV networks.
Nevertheless, as previously mentioned, the receiver and the Rogowski
coil may be used in live LV conditions (see page 11).
The JUPITER+ Receiver is equipped with sensors dedicated to each
function to « extract » the signals emitted by the JUPITER+
Transmitter.
The results obtained, by the Receiver, require no interpretation, the
detection algorithms assure safety.
IMPLEMENTATION
Identifying
loops
for
short-circuited
core
17 / 30