Select Backlight Duration - Uwatec Z1 User Manual

6-5. Select Backlight Duration

How to Set
1. In Watch Mode or Surface Mode, press-and-hold the ADJUST button
for about 2 seconds. [SET] [Hold] fl ashes and [CITY] appears for about
1 second, followed by the city code and the city name which will scroll
in the upper right hand corner of the screen.
2. Press the MODE button 10 times. [LIGHT] is displayed, and [1] or [3]
fl ashes in the middle of the screen.
3. Press the PLAN button to select [1] (lights the display for 1.5 seconds)
or [3] (lights the display for 3 seconds).
4. Press the ADJUST button to save the selection and return to Watch
Mode or Surface Mode. Or, you can press the MODE button to move to
the next setting in the series, which is Power Saving.
27