Web Slicer Ui - Monoprice 35435 User Manual

Web Slicer UI

1. Upload an STL 3D model file by dragging and dropping the file onto the Web Slicer
screen.
2. Adjust the Layer Height, Exposure Time, Lift Height, and Lift Speed parameters.
a. Layer Height: The vertical size in millimeters of each printed layer. Smaller values
will result in a smoother surface on the finished print model, but will take longer
to print. On the other hand, larger values will result in a coarser surface, but will
take less time to print.
b. Exposure Time: The amount of time that the UV light will expose each layer
during printing. Different manufacturers have different cure times for their
resins. Monoprice resin has a cure time of 8 seconds for layers other than the
base three layers.
c. Lift Height: The number of millimeters that the Printing Platform is lifted out of
the Resin Vat between layers. Different manufacturers have different viscosities
for their resin. For more viscous resins, a higher lift height may be necessary.
d. Lift Speed: The speed at which the Printing Platform is lifted from the Resin Vat
between layers.
17