Specifications; Ambient Operating Temperature - Siemens SITRANS LR260 Quick Start Manual

Specifications

For a complete listing, see the SITRANS LR260 (HART) Operating Instructions. For Approvals
information, please refer to the device nameplate and the process device tag.
Ambient/Operating Temperature
Notes:
• Process temperature and pressure capabilities are dependent upon information on the
process device tag. The reference drawing listed on the tag can be downloaded from the
Siemens website at: www.siemens.com/LR260.
Loop power
• See
Power
Nominal 24 V DC with max. 550 Ohm loop resistance. (Check the device
nameplate for the characteristics of the device, and confirm the loop load.)
• Maximum 30 V DC
Approvals
• General
• Radio
• Hazardous
Use appropriate conduit seals to maintain IP or NEMA rating.
Note:
A5E32106122 SITRANS LR260 (HART) – QUICK START MANUAL
on page 19, for more details.
ambient temperature
–40 °C to +80 °C (–40 °F to +176 °F)
process temperature (with FKM O-ring)
non-pressure version: –40 to +200 °C (–40 to +392 °F)
pressure rated version: –40 to +80 °C (–40 to +176 °F)
• 4 to 20 mA
CSA , FM, CE, C-TICK
US/C
Europe (R&TTE), FCC, Industry Canada
ATEX II 1G, 1/2D, 2D Ex ia IIC T4 Ga, Ex ta IIIC T100 °C Da
ATEX II 3G Ex nA IIC T4 Gc
IECEx SIR 11.0153X Ex ia IIC T4 Ga, Ex ta IIIC T100 °C Da
FM/CSA Class I, Div. 1, Groups A, B, C, D Class II, Div. 1,
Groups E, F, G, Class III T4
FM/CSA Class I, Div. 2, Groups A, B, C, D T5
SABS ARP0108 Ex ia IIC T4 Ga
INMETRO:DNV 12.0081 X
Ex ia IIC T4 Ga
Ex ta IIIC T100 °C Da
-40 ºC  Ta  +80 ºC
IP67/IP68
DNV #OCP 0017
ABNT NBR IEC 60079-0:2008
ABNT NBR IEC 60079-11:2009
ABNT NBR IEC 60079-26:2008 e
ABNT NBR IEC 60079-31:2011
Page EN-3