Using Cameras For Live Feeds; Figure 20 - Serial Commands; Figure 21 - Serial Command Dialog - Black Box AC1140A Quick Start Manual

Video and audio over ethernet standalone transmitter, video and audio over ethernet pc card transmitter, video and audio over ethernet receiver

Table of Contents

The Add and Edit buttons will display the Serial Command Dialog. This dialog will allow you to name the

serial command (must be unique) and enter the command data in either HEX or ASCII format. The Delay

option tells the system to wait for the specified time after sending the RS232 command. You have the

option of sending the data in HEX or ASCII format.

Keep in mind that you still need to configure the serial port for the receiver you wish to send RS232

command thru. You also need to schedule tasks that use the command.

5.0

USING CAMERAS FOR LIVE FEEDS

Live camera feeds can be displayed on the video LAN in two ways:

1. By connecting the camera HDMI output (if available) directly to the AC1140 DVI input using the

supplied HDMI-to-DVI adapter.

Table of Contents

Ac1140c Ac1141a