Table of Contents
Advertisement
The system menu contains commands that affect the entire video network or system.
Figure 14 - System Menu
The "All Host Play" command instructs all transmitters to play their local play content. The F6 key also
initiates this command.
The "All Local Play" command instructs all receivers to play their local play content. The F7 key also
initiates this command.
The "All Live Play" command instructs all receivers to play the stream it receives from the transmitter. The
F8 key also initiates this command.
The "All Audio On" command turns the audio on for all transmitters and receivers. The F9 key also
initiates this command.
The "All Audio Off" command turns the audio off for all transmitters and receivers. The F10 key also
initiates this command.
The "Emergency Broadcast" command activates Conductor's EMCast feature. This broadcasts an
emergency message on all receivers. See the EMCast section for more details.
The "Check Network Status" command will open a dialog to allow you to quickly check the status of the
network to ensure all devices are communicating properly. This command can also be scheduled to occur at
a regular interval using the [Conductor]
[Options] command.
The "Refresh Network" command will rediscover the video network and update the display. This is
essentially the same as exiting and restarting Conductor.
12
Advertisement
Table of Contents
