National Instruments IMAQ PCI-1409 User Manual page 34

Appendix A Specifications
A/D Conversion
Internal Pixel Clock
PCI Interface
IMAQ PCI/PXI-1409 User Manual
Input range (black to white)....................700 mV (calibrated)
Accuracy .................................................±1.5% of reading
Temperature drift ....................................< 250 ppm/°C
Gray levels ..............................................1024 (10-bit)
Differential nonlinearity .........................±1 LSB max
RMS noise ..............................................< 0.5 LSB rms
Signal-to-noise ratio ...............................56 dB typ
Sampling rate ..........................................2 MHz to 40 MHz, externally
Pixel aspect ratio.....................................Programmable ±5% of nominal
Frequencies range ...................................11.6 to 25.8 MHz
Pixel ratio for
standard video sources............................±5%
Pixel jitter ...............................................< 2 ns peak
PCI initiator (master) capability .............Supported
PCI target (slave) capability ...................Supported
Data path.................................................32 bits
Card voltage............................................5 V only
Card type.................................................32-bit half-size card
Parity generation/checking,
error reporting.........................................Supported
Target decode speed ...............................Medium (1 clock)
200 mV to 1.40 V full scale
clocked
A-2 ni.com