Administrator Setting (Registration) - Uniden DTL-8R-1 User Operation And Specification

3.16.19 Administrator Setting (Registration)

Step 1 Press and Hold Base Station Left Key until Blue LED start blinking. (for 3seconds)
Step 2 Select "Registration" and press select key. Then the LCD shows Registration
screen.
Step 3 Handset find Base Station.
Step 4 Finish Registration.
Start finding Base Station.
In this screen, following keys are available.
cancel key:
Exit from registration mode
Enter Registration PIN.
In this screen, following keys are available.
(Default Value is "1234")
delete key:
Delete 1 digit.
Dial(0-9) key:
Enter 1 digit.
OK key:
Send Registration PIN to the Base Station.
After 5 seconds elapsed, The
Handset goes to each state.
Registration completed:
goes to Standby state
Registration Failed:
goes to De-register state
or Standby state.
50