Channel Change; Auto Stand-By; Pbx No Service - Uniden DTL-8R-1 User Operation And Specification

3.6 Channel change

It changes channel automatically.

3.7 Auto Stand-by

When the Handset is in these modes, which is shown below placing the Handset on the
Charger will change it to Stand-by mode. At this time, confirmation tone is emitted.
l
Ringer volume setting
l
Menu setting
l
Talk mode
l
Trying to connect to the Base Station

3.8 PBX No Service

Talk or speaker key is pressed when the Base Station is using wired phone or there is not
acknowledgment from PBX.
The Handset goes to standby mode after the LCD shows below.
<Notes>
1) Handset does not emit tone, when it goes to standby mode.
35