SMC Networks EZ CONNECT SMC2755W User Manual page 15

SMC2755W - Rear Panel
3. Connect the Ethernet Cable – The SMC2755W can be wired to
a 10/100Mbps Ethernet through a network device such as a
hub or a switch. Connect to the RJ-45 connector socket on the
back panel with category 3, 4 or 5 UTP Ethernet cable and an
RJ-45 connector.
4. Connect the Power Cable – Connect the power adapter cable
to the 3.3 V DC power socket on the rear panel.
Warning: USE ONLY the power adapter supplied with the
SMC2755W. Otherwise, the product may be damaged.
Reset
Button
3.3V
4A MAX
3.3 V DC
RJ-45
Power Socket
Connector
7