Hyundai Equus 2015 Owner's Manual page 141

6. Firmly press and release the
"learn" or "smart" button. (The
name and color of the button vary
by manufacturer). There are 30
seconds to initiate step 7.
7. Return to the vehicle and firmly
press, hold for 2 seconds and
release the programmed
®
HomeLink button. Repeat the
"press/hold/release" sequence a
second time, and, depending on
the brand of the garage door
opener (or other rolling code
equipped device), repeat this
sequence a third time to complete
the programming process.
®
HomeLink should now activate your
rolling code equipped device.
Gate operator & Canadian
programming
During programming, your handheld
transmitter may automatically stop
transmitting. Continue to press the
®
Integrated HomeLink
Control System button (note steps 2
through 3 in the Programming portion
of this document) while you press
and re-press ("cycle") your handheld
transmitter every two seconds until
the frequency signal has been
learned. The indicator light will flash
slowly and then rapidly after several
seconds upon successful training.
Features of your vehicle
Operating HomeLink
To operate, simply press and release
the programmed HomeLink
Activation will now occur for the
trained device (i.e. garage door
Wireless
opener, gate operator, security sys-
tem, entry door lock, home/office
lighting, etc.). For convenience, the
hand-held transmitter of the device
may also be used at any time.
Reprogramming a single
®
HomeLink button
To program a device to HomeLink
using a HomeLink
ly trained, follow these steps:
1. Press and hold the desired
®
HomeLink
release the button.
2. The indicator light will begin to flash
after 20 seconds. Without releasing
the HomeLink
with "Programming" step 2.
For questions or comments, contact
®
HomeLink at www.homelink.com or
1-800-355-3515.
®
®
button.
®
®
button previous-
button. DO NOT
®
button, proceed
4 49