EFI Vutek QS2000 Operator's Manual page 53

1 Clean the surface of the carriage rails using a clean lint-
2 With the carriage positioned to the far left end, apply
3 From the VUTEk User Interface Service menu, click
4 From the Service Aids dialog box Carriage
5 Apply light oil to a lint-free cloth and wipe evenly over the
6 Wipe off the dust rings on both ends of the carriage rail.
7 From the VUTEk User Interface Service Aids dialog box
OMM-00038-US English-F
free cloth.
light oil (such as 3-In-One) to a lint free cloth and wipe
evenly over the surfaces of the upper and lower carriage
rails.
Service Aids.
Maintenance Positions section, click Maintenance
( ) to move the carriage to the maintenance position.
surface of the home position.
Do not apply oil directly onto rails. Oil may drip onto the
media or encoder strip and can result in print defects.
Before returning the printer to operation, wipe any excess
oil from the rails. If any oil is on the encoder strip, clean
the encoder strip with isopropyl alcohol.
Carriage Maintenance Positions section, click Home
( ) to move the carriage to the home position.
QS Series Basic Operator's Guide
Carriage rails
47