Installing The Tables - EFI Vutek QS2000 Operator's Manual

QS Series Basic Operator's Guide

Installing the tables

The input and output tables can be installed without
removing the unwinder or rewinder accessories. The input
and output tables are installed over the winder assemblies.
1 Remove any continuous media from the rewinder and
2 Position the table between the mounting brackets on the
3 Engage the table bracket with the mounting brackets on
22
Sheet media feed path
conveyor belt. Roll the excess media back onto the air core
shaft on the unwinder.
printer.
the printer.
Table bracket
OMM-00038-US English-F