Part Name: 1 – inner drain hose 2 –check plate assembly
3.
Pull out check plate from check plate holder, and replace a new check plate.
4.
Reverse the above procedure to install. And check out all connectors connects well.
Inlet valve
Removal and Replacement
1.
Remove cover of bottom board. (see main control board removal and replacement)
2.
Pull out all terminals of inlet valve.
3.
Remove clamp for fixing connecting hose to inlet valve, and contrarotate inlet valve to take it
out.
4.
Reverse the above procedure to install. And check out all connectors connected well.
Control Panel
The outer door covers the door to the dishwasher and protects the detergent dispenser.
Removal and Installation
1. Open the door of dishwasher. And remove all screws for fixing control panel.
Lave vaisselle ELVC 491B
1
2
Clamps
Terminals
12