ResMed S8 AutoSet Spirit User Manual page 40

Problem
The following message
is displayed on the
LCD after you try to
copy data to a Data
Card:
Card Error
Remove Card
The following message
is displayed on the
LCD after you try to
update the settings
using the Data Card:
Settings Invalid
Remove Card
The following message
is displayed on the
LCD after you try to
update the settings
using the Data Card:
Settings Error
Remove Card
The following message
is NOT displayed on
the LCD after you try
to update the settings
using the Data Card:
Settings Success
Remove Card
34
Possible Cause
You may have removed the Data
Card before settings were copied
to the S8 AutoSet Spirit.
The card is not a ResScan Data
Card.
The Data Card is not inserted
correctly.
The card is not a ResScan Data
Card.
You may have removed the Data
Card before data was copied to
it.
The identification details on the
Data Card do not match the
details on your device.
There is a data error on the Data
Card.
The settings were not updated.
Solution
Reinsert the Data Card and wait
for the Settings Success
Remove Card message to
appear on the LCD.
Only use a ResScan Data Card.
Ensure that the Data Card is
inserted with the arrow facing up
and pointing toward the device.
Use a ResScan Data Card, as
specified in this manual.
Reinsert the Data Card and wait
for the Copy Complete
Remove Card message to
appear on the LCD.
Contact your clinician
immediately.
Contact your clinician
immediately.
Contact your clinician
immediately.