4
Install the
I/O-board
interposers.
5
install the
base
cover.
6
Follow the procedure in
IO board
Removing the IO board
1
Follow the procedure in
2
Remove the
base
cover.
3
Remove the
I/O-board
4
Remove the battery.
5
To remove the I/O board:
a
Remove the two screws (M2x4) that secure the wireless-antenna bracket to the I/O board [1].
b Using a plastic scribe, disconnect the antenna cables from the I/O board [2].
c
Remove the three screws (M2x4) that secure the Type-C USB bracket to the I/O board [3].
d Using a plastic scribe, disconnect the speaker cable from the I/O board [4].
e
Disconnect the LED and microphone cable from the I/O board [5].
32
Removing and installing components
After working inside your
computer.
Before working inside your
interposers.
computer.