4
Install the
base
cover.
5
Follow the procedure in
Heat sink
Removing the heat sink
1
Follow the procedure in
2
Remove the
base
cover.
3
To remove the heat sink:
a
Peel the tape that secures the heat-sink shield to the system board [1].
NOTE:
The tape on the heat-sink shield is necessary to reduce the noise for the system. The tape can be reused and
has to be adhered when the heat-sink shield is installed.
b Using a plastic scribe, release the heat-sink shield from the slots on the system board [2].
c
Lift the heat-sink shield off the system board [3].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
25