Dell Precision 5530 Service Manual page 44

3 Close the display.
4 Connect the antenna cables to the I/O board [1].
5 Align the screw holes on the wireless-antenna bracket with the screw holes on the I/O board and replace the two screws (M2x4) that
secure the bracket to the I/O board [2].
6 Connect the display cable to the system board and close the latch [3].
7 Align the screw holes on the display-cable bracket with the screw holes on the system board and replace the two screws (M1.6x1.8)
that secure the bracket to the system board [4].
8 Affix the tape that secures the display-cable bracket to the system board [5].
9 Affix the camera cable to the palm-rest and keyboard assembly [6].
10 Connect the camera cable to the system board and close the latch [7].
44 Removing and installing components