Castles Technology Qprox QP3000S Manual

Reader

Table of Contents

Download this manual

Deiscription of QP3000S Reader:

There are several ways to supply power to a QProx reader

By external DC adapter supplying12V/1A through DB9 RS232 connector.

By USB port supplying 5V/500mA.

QPROX *1

ADAPTER*1(Optional)

USB/RS232 CABLE (Choose one of the cables prior to ordering)

2.1

Step1. Unscrew SAM card cover screws

Step3. Remove SAM card cover

Step5. Reinstall SAM card cover and screws back

LCD Display

LED (Blue)

LED (Orange)

LED (Green)

LED (Red)

Landing Zone

SAM Card Cover

Step2. Push SAM card cover upward

Step4. Insert SAM cards into SAM slots

Table of Contents

Need help?

Do you have a question about the Qprox QP3000S and is the answer not in the manual?

Page 1 Deiscription of QP3000S Reader: LCD Display LED (Blue) LED (Orange) LED (Green) LED (Red) Landing Zone SAM Card Cover Power There are several ways to supply power to a QProx reader By external DC adapter supplying12V/1A through DB9 RS232 connector. By USB port supplying 5V/500mA.
Page 2 2.2 Reader Stand Installation Step1. Align and insert a reader stand to the fixture Step2. Push the reader stand upward until hearing holes at the back of a reader a click sound 2.3 Installation Notice Do not place the reader on a metallic surface to avoid interferences LED Indicator There are 4 LED indicators on a QProx.
Page 3 警語依據低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Notice This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.