Fast Facts User Guide - MP200
Installing the Terminal
•
Plug
the
power supply
number 1
button.
•
Turn
the terminal
on the diagram to the right.
•
If prompted, enter the Merchant ID (MID)
•
You will now be prompted to select your connection
.';
method, either Wi-Fi or
•
Wi-Fi
•
Select
Your
Wi-Fi network
•
Enter your
Wi-Fi
password
•
The
terminal will now connect to your Wi-Fi
•
Mobile
•
Your terminal will search for a network connection
and connect automatically
•
The
terminal will now complete a short installation
and will be ready for use.
Your
and
Note:
Merchant
ID
to you via
email.
It
is important that you change
memorable
number
and keep
To change the
Manager
Passcode:
•
From the idle screen, press the red key to enter the
System Menu
•
Enter the Manager
press OK.
•
Scroll
down using the # Key to
press OK.
•
Erase
the existing
•
Now enter
your
chosen
•
NOTE:
Please
keep your New passcode
Contactless Transactions
•
From the
idle
screen, key in the transaction amount and
press
OK
(green
key).
•
The
terminal
will display the contactless symbol
•
Ask
the customer to present their contactless card or
device to the
terminal
screen. The Terminal will BEEP
when it has read the card or device.
•
The card terminal will
then
complete the transaction.
into
the side of the
terminal
on
by pressing the power button labelled 6
Mobile.
will
be sent
Manager Passcode
your
Manager Passcode to a
it
safe.
Passcode
provided to you and
'Change
passcode'
using the yellow
Key.
passcode
New passcode.
SAFE.
request an Authorisation and
near the
and
Chip and Pin Transactions
•
From the idle screen, Key in the transaction
amount and press OK (green
•
Ask the customer to insert their card
terminal.
•
When prompted by the
should enter their PIN and press OK.
•
The device will then go online to authorise (or
decline)
•
The
customer should not remove
prompted to do so.
•
The card terminal will then
Authorisation and complete the transaction.
6
2....
3011
1
key).
terminal
the customer
the transaction.
their
request
an
into
the
card
until