Operation And Safety Decals - MULTIQUIP Mikasa Series Operation And Parts Manual

Figure 2 displays the operation and safety decals as they appear on the reversible plate compactor. Should any of these decals
become damaged or unreadable, contact the Multiquip Parts Department for a replacement set.
P/N 920203330
SAE 10W-30
MOTOR OIL
P/N 920201950
V BELT HDPF-5370
P/N 920211010
OPERATIONAL CAUTION
Do not move travel lever
if engine stops
P/N 920211060
P/N 920204580
PAGE 10 — MVH-406DSY PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (11/28/05)
MVH-406DSY — OPERATION AND SAFETY DECALS
MVH-406
Shell Tellus Oil Shell Tellus Oil
P/N 920211090
NPA-195 J
NPA-537 J
NPA-1106
P/N 920106760
P/N 920105070
Figure 2. Operation and Safety Decals
P/N 920211640
32 32
0PERATIONAL CAUTION
Prior to OPERATION, check the engine oil and fuel levels. If not enough, add to proper levels.
Warm up engine at low speed for 3-5 minutes.
Operate machine at full throttle speed. (incorrect clutch engagement causes clutch to burn.)
Use travel lever for forward & reverse motion. Do not push or pull travel lever strongly.
P/N: 920209620
STOP
RUN
START
P/N 920201580
NPA-962 J
Serial No.
Model No.
CONTACT
MQ PARTS DEPT.