Whisper Power W-TG 3000 User Manual page 5

1 RATED OUTPUT
The identification plate gives the nominal maximum
continues load in kVA (= kW). The power should
never exceed the nominal power as shown on the
identification plate. Power is rated at an ambient
temperature of 40°C.For higher temperatures the
generating set has to be derated.
2 VOLTAGE shows the nominal voltage.
This voltage should be within the specified tolerance
at the nominal frequency.
3 FREQUENCY is shown in Hz and is determined by
the speed of the engine (RPM). 50 Hz correlates with
3000 rpm.
.
4 POWER FACTOR
When calculating a load one should always take into
account the power factor or cos. phi of this load.
5 The identity of the generating set is given by the
SERIAL NUMBER. When this number is available the
EN / W-TG 3000 / June 2012
manufacturer can trace the specifications of the
generating set. On the identification plate are also
some basic features of the set:
CE-marking: the "CE" symbol shows that the
6
generating set is build according to European
Community safety regulations. This includes the
regulations regarding the safety of pleasure craft,
safety of machinery, electric safety and electric
magnetic compatibility (EMC) and other relevant
directives.
Safety also relies on the installation, application and
circumstances. See also the remarks in this manual under
SAFETY
Before changing a factory setting you are advised to
consult the manufacturer. When the generating set you
have to identify is not new you have to take into account
the possibility that former users may have changed the
settings. Check the settings (voltage, frequency, rpm)
when there is any doubt.
5