Transporting - Toshiba G9000 SERIES Installation And Operation Manual

4.3

Transporting

DO NOT tilt the Maintenance Bypass Cabinet more than 10° from
upright position.
Tilting more than 10° may cause crushing, trapping or other personal
injuries.
DO NOT transport, move, store, or place the Maintenance Bypass
Cabinet on its sides.
Excessive force applied from heavy components inside may damage
the Maintenance Bypass Cabinet.
Avoid vibration or shock exceeding 0.5 g.
Failing to observe this precaution may cause damage to the
Maintenance Bypass Cabinet.
DO NOT allow the Maintenance Bypass Cabinet to suffer shock
or impact when unpacking.
Tools used to remove packaging materials may cause damage to the
Maintenance Bypass Cabinet
DO NOT install the Maintenance Bypass Cabinet where water
may fall on it.
Water may cause electrical shock, personal injury or Maintenance
Bypass Cabinet failure.
DO NOT push or pull on the sides of the packaging or the
Maintenance Bypass Cabinet to move it. Always use a crane,
forklift, or pallet jack for transporting and positioning the
cabinet.
Pushing/pulling on the sides of the unit to move it may result in damage
to the Maintenance Bypass Cabinet.
The Maintenance Bypass Cabinet may be packed in a crate for extra protection during transportation.
Avoid impact or vibration against the Maintenance Bypass Cabinet during transportation. DO NOT expose
the Maintenance Bypass Cabinet directly to water.
6
WARNING
CAUTION
G9000 Slim MBS Installation and Operation Manual – 96011-000