Advertisement
End positions adjustment (screen with built-in radio control – engine type "C-RTS")
Correcting the bottom end position:
1. Using the remote control button UP set the roller-blind in the top end position.
2. At the same time, press and hold for more than 5 seconds buttons UP and DOWN. The drive
moves briefly up / down.
3. Using the buttons UP, DOWN, STOP, set the roller-blind in the new end position.
4. Press and hold the button STOP for more than 2 seconds The drive moves briefly up / down
Fig. 12
Correcting the bottom end position:
1. Using the remote control button DOWN set the roller-blind in the bottom end position.
2. At the same time, press and hold for more than 5 seconds buttons UP and DOWN. The drive
moves briefly up / down.
3. Using the buttons UP, DOWN, STOP, set the roller-blind in the new end position.
4. Press and hold the button STOP for more than 2 seconds The drive moves briefly up / down
Fig.13
w
w
w .
k
a u
b
e
r .
e
-9-
u
Advertisement
