Measurement - Konica Minolta CM-26dG Basic Operating Instructions Manual

Measurement

1
Turning the Power ON
Language selection
P.103, Instruction Manual
Measurement cond. setting
Measurement area selection
P.33, Instruction Manual
Note: Make sure the measurement area set on the instrument
is the same as the area of the target mask to be used.
Zero calibration
P.35, Instruction Manual
2
White calibration
White calibration
Gloss calibration (* CM-26dG only)
3
Measurement
(P.6)
* As necessary (after initialization, etc.)
P.92, Instruction Manual
* When required depending on the
measurement conditions
* Only when required (when changing
the measurement conditions, etc.)
(P.6, P.7)
(P.8)
5