Konica Minolta CM-26dG Basic Operating Instructions Manual page 9

Gloss
calibration
only with the 26dG
P.38,
Instruction Manual
If using the CM-26dG, perform
gloss calibration next.
④ Place the instrument
in the gloss calibration
position.
Calibration stage
⑤ Press the
measurement button.
∙ Gloss calibration will
be performed.
∙ Do not move the
instrument until gloss
calibration is complete.
∙ When gloss calibration is
completed, the screen returns
to the <Sample> screen.
7
Measurement
Place the
instrument
on the
calibration
stage
according to
the marks.